Detailed Product Description

The high power LED underwater light is one of the lighting fixture used in water and is composed of high power LED. It is widely used in fountain pool, theme park and the underwater lighting. Its bright and colorful lighting effect mixed by R,G,B beautify the environment and ornament the city.(This light can be used under water or not. )

LED underwater light adopts aluminium alloy shell, with good airtightness, dimmable lighting angle and can set address by coder, besides, connect DMX controller to realize many pcs lights color changing such as chasing, gradually changing, holistic changing etc..(More details to see Function Instruction) .

LED underwater light uses low voltage power supply, with high safety, low power consumption, long lifespan and good lasting. It matches 6-pin waterproof connecting cable and can work only to use together with our waterproof power supply and shape T cable.

Specification Parameter:

Electronic Parameter:

  Input voltage: DC24V

  Max power: 24.6W

  Communication protocolStandard DMX512 protocol

  Controling system: Standard DMX512 controller+power supply(advise to use our waterproof power supply)+coder

Working Environment:

Product features:

  Realize RGB dimmable and various color changing by control of outer DMX controller;

  Waterflow, chasing and other lighting effect are available if connect many pcs lights;

  Standard DMX512 control way;

  Dreamlike color changing when there is no controller.

Technical drawings

Function introduction

1.Coding

Put all the LED underwater lights in the right order

Connect the lights transfering connection with coders signal output pole, DC 24V power input the accepting pole of the transfering connection.

Connect the output pole of transfering connection together with the light, then, power on. Choose coding button on the coder and set address for the first light(default to be 0001), then press confirm button to finish the 1st lights coding. The lights coding will be OK when it flashes green once for about 0.2 seconds During the coding.

Repeat step3 to set other lights address, the order will be 1,2,3,4,,170.

The detailed installation and connection of underwater lights, please to see connection diagram.

2.Outer controller

Underwater light can be matched with our companys DMX controller to realize RGB gradual changing, chasing, waterflow etc. color changing modes. More details to see the instructions of DMX controller.

3.This underwater light can also be controlled by DMX512 console and get DMX channel automatically according to the coding-address. Every light occupy 3 DMX channel, every channel control the brightness of R/G/B respectively, total 255 rank. E.g., No.1 lights DMX channel is 1,2,3, then, No.2 lights DMX channel will be 4,5,6, others can be analogized in this way. One DMX512 console controls maximum 170 different address(001,002,,170) lights.

Detailed DMX channel introduction is as below:

4.Automatic function

When all lights have no any signal, they will be gradual changing mode and show dreamlike lighting.

Remark:

       1.)Every lights cables at either end is 3m, each address can be used by many pcs lights, same address
will be same color changing mode.

     2.) Shape T cables distance is 2m(can be made according to the specific request of projects, should not be more than 30m.)

       3.) The total length of 3-pin signal connecting cable should not be more than 100m, add signal amplifier if excess.

Luminosity performance

Standard light output(20°C environment)

Solution for common fault

  If the light can not light, pls check whether power on or switch on

   If the light is on or off continuously, pls check whether power supply is loose or
not touch well; whether the lights connector not touch well.

Note: If all above points still can not make the light work regularly, pls contact with professional person.